|
Model
|
PT-DZ870
|
PT-DW830
|
PT-DX100
|
|
Power supply
|
120-240 V AC, 10-5.2 A, 50/60 Hz
|
|
Power consumption
|
1,030 W (1,060 VA)
(0.3 W when STANDBY MODE set to ECO*1, 3 W when STANDBY MODE set to NORMAL)
|
|
Dissipation BTU
|
3,516 BTU/hour
(without light PT-DZ870/DW830: 3,400 BTU/hour, PT-DX100: 3,379 BTU/hour)
|
|
DLP™ chip
|
Panel size
|
17.0 mm (0.67 in)
diagonal
(16:10 aspect ratio)
|
16.5 mm (0.65 in)
diagonal
(16:10 aspect ratio)
|
17.8 mm (0.7 in)
diagonal
(4:3 aspect ratio)
|
|
Display method
|
DLP™ chip x 1, DLP™ projection system
|
|
Pixels
|
2,304,000
(1,920 x 1,200) pixels
|
1,024,000
(1,280 x 800) pixels
|
786,432
(1,024 x 768) pixels
|
|
Lens
|
PT-DZ870/
DW830/
DX100
|
Powered zoom
(throw ratio 1.7-2.4:1),
powered focus
F 1.7-1.9, f 25.6-35.7 mm
|
Powered zoom (throw ratio 1.8-2.5:1),
powered focus F 1.7-1.9, f 25.6-35.7 mm
|
|
PT-DZ870L/
DW830L/
DX100L
|
Optional powered zoom/focus lenses and fixed-focus lens
|
|
Lamp
|
420 W UHM lamp x 2
|
|
Screen size (diagonal)
|
1.27-15.24 m (50-600 in),
1.27-5.08 m (50-200 in) with the ET-DLE055,
2.54-8.89 m (100-350 in) with the ET-DLE030,
16:10 aspect ratio
|
1.27–15.24 m
(50-600 in),
1.27-5.08 m
(50-200 in)
with the ET-DLE055,
2.54-8.89 m
(100-350 in)
with the ET-DLE030,
4:3 aspect ratio
|
|
Brightness*2
|
8,500 lm
(dual-lamp, LAMP MODE: NORMAL)
|
10,000 lm
(dual-lamp,
LAMP MODE: NORMAL)
|
|
Center-to-corner uniformity*2
|
90 %
|
|
Contrast*2
|
10,000:1 (full on/full off, in dynamic iris 3 mode)
|
|
Resolution
|
1,920 x 1,200 pixels
|
1,280 x 800 pixels
(Input signals that
exceed this resolution
will be converted
to 1,280 x 800 pixels.)
|
1,024 x 768 pixels
(Input signals that
exceed this resolution
will be converted
to 1,024 x 768 pixels.)
|
|
Scanning
frequency
|
SDI
|
3G-SDI
|
SMPTE ST 424 compliant,
[RGB 4:4:4 12-bit/10-bit]
1125(1080)/60i,
1125(1080)/50i,
1125(1080)/25p,
1125(1080)/24p,
1125(1080)/24sF,
1125(1080)/30p,
[YPBPR4:2:2 10-bit]
1125(1080)/60p,
1125(1080)/50p
|
-
|
|
HD-SDI
|
SMPTE ST 292 compliant,
[YPBPR4:2:2 10-bit]
750(720)/60p,
750(720)/50p,
1125(1035)/60i,
1125(1080)/60i,
1125(1080)/50i,
1125(1080)/25p,
1125(1080)/24p,
1125(1080)/24sF,
1125(1080)/30p
|
-
|
|
SD-SDI
|
SMPTE ST 259 compliant,
[YCBCR4:2:2 10-bit]
525i(480i), 625i(576i)
|
-
|
|
HDMI/DVI-D
|
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 25-162 MHz
|
|
RGB
|
fH: 15-100 kHz, fV: 24-120 Hz, dot clock: 162 MHz or lower
|
|
YPBPR(YCBCR)
|
fH: 15.75 kHz, fV: 60 Hz [480i (525i)]
fH: 15.63 kHz, fV: 50 Hz [576i (625i)]
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p]
fH: 33.75 kHz, fV: 60 Hz [1035 (1125)/60i]
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i]
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p]
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p]
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]
fH: 31.50 kHz, fV: 60 Hz [480p (525p)]
fH: 31.25 kHz, fV: 50 Hz [576p (625p)]
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p]
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i]
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p]
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF]
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p]
|
|
Video/YC
|
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
|
|
Optical axis shift*3
|
Vertical
|
+50 % from center
of screen (powered)
|
+60 % from center
of screen (powered)
|
+50 % from center
of screen (powered)*4
|
|
Horizontal
|
±10 % from center
of screen (powered)
|
±10 % from center
of screen (powered)
|
±10 % from center
of screen (powered)
|
|
Keystone correction range
|
Vertical ±40°*5*6,
horizontal ±15°*7*8
|
Vertical ±40°*9
|
|
Keystone correction range with the
optional upgrade kit ET-UK20*10
|
Vertical ±45°*6*11,
horizontal ±40°*8*12
|
-
|
|
Installation
|
Ceiling/floor, front/rear
|
|
Terminals
|
SDI IN
|
BNC x 1 (3G/HD/SD-SDI)
|
-
|
|
HDMI IN
|
HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
|
|
DVI-D IN
|
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)
|
|
RGB 1 IN
|
BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)
|
|
RGB 2 IN
|
D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCRx 1)
|
|
3D SYNC 1 IN/OUT
|
BNC x 1 (3D timing signal)
|
|
3D SYNC 2 OUT
|
BNC x 1 (3D timing signal)
|
|
VIDEO IN
|
BNC x 1 (composite video)
|
|
SERIAL IN
|
D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
|
|
SERIAL OUT
|
D-sub 9-pin (male) x 1 for link control
|
|
REMOTE 1 IN
|
M3 x 1 for wired remote control
|
|
REMOTE 1 OUT
|
M3 x 1 for link control (for wired remote control)
|
|
REMOTE 2 IN
|
D-sub 9-pin (female) x 1 for external control (parallel)
|
|
LAN / DIGITAL LINK
|
RJ-45 x 1 (for network and DIGITAL LINK (video/network/serial control) connection,
100Base-TX, compatible with Art-Net, compliant with PJLink™,
Deep Color, compatible with HDCP)
|
|
Cabinet materials
|
Molded plastic
|
|
Dimensions
(W x H x D)
|
PT-DZ870/
DW830/
DX100
|
498 x 200*13x 556 mm (19-19/32 x 7-7/8*13x 21-7/8 in) (with supplied lens)
|
|
PT-DZ870L/
DW830L/
DX100L
|
498 x 200*13x 513 mm (19-19/32 x 7-7/8*13x 20-3/16 in) (without lens)
|
|
Weight*14
|
PT-DZ870/
DW830/
DX100
|
Approximately 18.3 kg (40.3 lbs) (with supplied lens)
|
|
PT-DZ870L/
DW830L/
DX100L
|
Approximately 17.6 kg (38.8 lbs) (without lens)
|
|
Operation noise*2
|
40 dB (dual lamp operation, lamp mode: NORMAL),
35 dB (dual lamp operation, lamp mode: ECO)
|
|
Operating environment
|
Operating temperature: 0-45 °C (32-113 °F)*15,
operating humidity: 10-80 % (no condensation)
|
|
Applicable software
|
Logo Transfer Software,
Multi Projector Monitoring &
Control Software,
Geometry Manager Pro
(included in the ET-UK20)
|
Logo Transfer Software,
Multi Projector Monitoring & Control Software
|
|
Supplied accessories
|
Power cord with secure lock, wireless/wired remote control unit,
batteries (R03/AAA type x 2), software CD-ROM (Logo Transfer Software,
Multi Projector Monitoring & Control Software)
|