PANASONIC PT-TX400

Brand

PANASONIC

Model

PT-TX400

Specifications

Power supply

100-240 V AC, 50/60 Hz

Power consumption

300 W (0.5 W when STANDBY MODE set to ECO,*1
6.0 W when STANDBY MODE set to NORMAL.)

LCD panel

Display method

Transparent LCD panel (x 3, R/G/B)

Drive method

Active matrix method

Panel size

16.0 mm (0.63 in) (4:3 aspect ratio)

Pixels

786,432 (1,024 x 768) pixels

Lens

Fixed (0.46:1 throw ratio), manual focus F = 1.8, f = 6.08 mm

Lamp

230 W x 1,
lamp replacement cycle (lamp control: Normal/Eco1/Eco2): 5,000 hours/6,000 hours/8,000 hours*2

Screen size (diagonal)

1.27-2.54 m (50-100 in), 4:3 aspect ratio

Brightness*3
(Lamp power: Normal)

3,500 lm

Center-to-corner uniformity*3

80 %

Contrast*3

10,000:1 (full on/off)
(RGB signal input, Color mode: Dynamic, Lamp power: Normal)

Resolution

1,024 x 768 pixels
(Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)

Scanning frequency

HDMI

fH: 15-91 kHz, fV: 24-85 Hz, dot clock: 162 MHz or lower

RGB (analog)

fH: 15-91 kHz, fV: 24-85 Hz, dot clock: 162 MHz or lower

YPBPR(YCBCR)

fH: 15.73 kHz, fV: 59.94 Hz [480i (525i)],
fH: 15.63 kHz, fV: 50 Hz [576i (625i)],
fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p],
fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i],
fH: 28.13 kHz, fV: 25 Hz [1080 (1125)/25p],
fH: 27.00 kHz, fV: 48 Hz [1080 (1125)/24sF],
fH: 67.50 kHz, fV: 60 Hz [1080 (1125)/60p],
fH: 31.47 kHz, fV: 59.94 Hz [480p (525p)],
fH: 31.25 kHz, fV: 50 Hz [576p (625p)],
fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p],
fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i],
fH: 27.00 kHz, fV: 24 Hz [1080 (1125)/24p],
fH: 33.75 kHz, fV: 30 Hz [1080 (1125)/30p],
fH: 56.25 kHz, fV: 50 Hz [1080 (1125)/50p]

Video/S-Video

fH: 15.73 kHz, fV: 59.94 Hz [NTSC/NTSC4.43/PAL-M/PAL60],
fH: 15.63 kHz, fV: 50 Hz [PAL/SECAM/PAL-N]

Optical axis shift

21:1 (fixed)

Keystone correction range

Vertical: ±15° (Auto, Manual), horizontal: ±15° (Manual)

Installation

Ceiling/floor, front/rear

Terminals

HDMI IN

HDMI 19-pin x 1 (compatible with HDCP, Deep Color)
480i,*4480p, 576i,*4576p, 720/60p, 720/50p, 1080/60i, 1080/50i,
1080/60p, 1080/50p, 1080/30p, 1080/25p, 1080/24p, 1080/24sF,
VGA (640 x 480)-WUXGA (1,920 x 1,200),*5
audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)

COMPUTER 1 IN

D-sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR/S-VIDEO x 1)
(The D-Sub/S-VIDEO conversion cable ET-ADSV is required for inputting S-VIDEO signals.)

COMPUTER 2 IN/
MONITOR OUT

D-sub HD 15-pin (female) x 1 (RGB x 1), (input/output selectable using on-screen menu)

MONITOR OUT

-

VIDEO IN

Pin jack x 1

AUDIO 1 IN

M3 x 1 (L-R x 1)

AUDIO 2 IN

Pin jack x 2 (L, R x 1)

AUDIO OUT

M3 x 1 (L-R x 1) for output (variable)

LAN

RJ-45 x 1
(for network connection, 10BASE-T/100BASE-TX, compliant with PJLink™(class 1))

SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

USB A

USB type-A (for the Memory Viewer) x 1

USB B

USB type-B (for the USB Display) x 1

Built-in speaker

10 W (monaural) x 1

Cabinet materials

Molded plastic (PC)

Dimensions (W x H x D)

335 x 134.1*6x 329 mm (13-3/16 x 5-9/32*6x 12-15/16 in)

Weight*7

Approximately 3.8 kg (8.4 lbs)

Operation noise*3

37 dB (Lamp power: Normal), 33 dB (Lamp power: Eco1), 28 dB (Lamp power: Eco2)

Operating temperature

5°C-40°C (41°F-104°F) (less than 1,400 m [4,593 ft] above sea level),
5°C-35°C (41°F-95°F) (between 1,400 m and 2,700 m [4,593 ft and 8,858 ft] above sea level)

Operating humidity

20-80 % (no condensation)

Supplied accessories

Power cord x 1*8,
Wireless remote control unit x 1,
Batteries (AAA/R03/LR03 type x 2),
Computer cable (1.5 m, for VGA) x 1,
Software CD-ROM (Multi Projector Monitoring & Control Software) x 1

NOTE

* Product numbers vary depending on the market. The general guideline is as follows:
The product number in Europe (except the UK) and CIS is PT-TX400E and PT-TX310E.
The product number in the UK, Asia (except Taiwan), Oceania, Middle East, and Africa is PT-TX400A, PT-TX310A and PT-TX210A.
*1 When the Standby mode is set to Eco, network functions such as power on over the LAN network will not operate.
Also, only certain commands can be received for external control using the serial terminal.
*2 The value for the recommended lamp replacement cycle is the maximum value, at which luminance will become 50 %.
The usage environment affects the duration of the lamp.
*3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.
*4 Only compatible with dot clock frequency of 27 MHz (pixel repetition signal).
*5 Compliant with VESA CVT-RB.
*6 With legs at shortest position.
*7 The above values are averages. Actual values may be different according to the product.
*8 Power cord (x2) for the PT-TX400A/TX310A/TX210A.