Model
|
VPL-EX230
|
Display System
|
Display System
|
3 LCD system
|
Display device
|
Size of effective display area
|
0.63” (16 mm) x 3 BrightEra LCD Panel, Aspect ratio: 4:3
|
Number of pixels
|
2,359,296 (1024 x 768 x 3) pixels
|
Projection lens
|
Focus
|
Manual
|
Zoom - Powered/Manual
|
Manual
|
Zoom - Ratio
|
Approx. x 1.2
|
Throw Ratio
|
1.47:1 to 1.77:1
|
Light source
|
Type
|
Ultra high pressure mercury lamp
|
Wattage
|
210 W type
|
Recommended lamp replacement time*1
|
Lamp mode: High
|
3000 H
|
Lamp mode: Standard
|
5000 H
|
Lamp mode: Low
|
10000 H
|
Filter cleaning / replacement cycle (Max.)*1
|
Filter cleaning / replacement cycle (Max.)
|
7000 H (cleaning)
|
Screen size
|
Screen size
|
30” to 300” (0.76 m to 7.62 m)(measured diagonally)
|
Light output
|
Lamp mode: High
|
2800 lm
|
Lamp mode: Standard
|
2100 lm
|
Lamp mode: Low
|
1600 lm
|
Color light output
|
Lamp mode: High
|
2800 lm
|
Lamp mode: Standard
|
2100 lm
|
Lamp mode: Low
|
1600 lm
|
Contrast ratio (full white / full black)*2
|
Contrast ratio (full white / full black)
|
3300:1
|
Displayable scanning frequency
|
Horizontal
|
14 kHz to 93 kHz
|
Vertical
|
47 Hz to 93 Hz
|
Display resolution
|
Computer signal input
|
Maximum display resolution: UXGA 1600 x 1200 dots*3
|
Video signal input
|
NTSC, PAL, SECAM, 480/60i, 576/50i, 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, The following items are available for digital signal (HDMI input) only; 1080/60p, 1080/50p
|
Color system
|
Color system
|
NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M, PAL-N
|
Keystone correction (Max.)
|
Vertical
|
+/-30 degrees
|
OSD language
|
OSD language
|
24-languages (English, Dutch, French, Italian, German, Spanish, Portuguese, Turkish, Polish, Russian, Swedish, Norwegian, Japanese, Simplified Chinese, Traditional Chinese, Korean, Thai, Vietnamese, Arabic, Farsi, Finnish, Indonesian, Hungarian, Greek)
|
INPUT OUTPUT (Computer/Video/Control)
|
INPUT A
|
RGB / Y PB PR input connector: Mini D-sub 15 pin female
|
INPUT B
|
RGB input connector: Mini D-sub 15 pin female
|
INPUT C
|
HDMI input connector: HDMI 19-pin, HDCP support
|
S VIDEO IN
|
S Video input connector: Mini DIN 4-pin
|
VIDEO IN
|
Video input connector: Pin jack
|
OUTPUT
|
Monitor output connector*4: Mini D-sub 15-pin (female)
|
REMOTE
|
RS-232C connector: D-sub 9-pin (male)
|
LAN
|
RJ-45, 10BASE-T/100BASE-TX
|
USB
|
Type-A
|
USB
|
Type-B
|
Acoustic noise
|
Lamp mode: Low
|
30 dB
|
Operating temperature / Operating humidity
|
Operating temperature / Operating humidity
|
0°C to 40°C (32°F to 104°F) / 35% to 85% (no condensation)
|
Storage temperature / Storage humidity
|
Storage temperature / Storage humidity
|
-20°C to +60°C (-4°F to +140°F) / 10% to 90% (no condensation)
|
Power requirements
|
Power requirements
|
AC 100 V to 240 V, 2.8 A to 1.2 A, 50 Hz / 60 Hz
|
Power consumption
|
AC 100 V to 120 V
|
Lamp mode: High: 272 W
|
AC 220 V to 240 V
|
Lamp mode: High: 261 W
|
Power Consumption (Standby Mode)
|
AC 100 V to 120 V
|
0.5 W (when “Standby mode” is set to “Low”)
|
AC 220 V to 240 V
|
0.5 W (when “Standby mode” is set to “Low”)
|
Power Consumption (Networked Standby Mode)
|
AC 100 V to 120 V
|
5.0 W (LAN)
5.6 W (optional WLAN module)
5.8 W (All Terminals and Networks Connected) (when "Standby Mode" is set to "Standard")
|
AC 220 V to 240 V
|
5.3 W (LAN)
5.9 W (optional WLAN module)
6.0 W (All Terminals and Networks Connected) (when "Standby Mode" is set to "Standard")
|
Standby Mode / Networked Standby Mode Activated
|
Standby Mode / Networked Standby Mode Activated
|
After about 10 Minutes
|
Wireless Network(s) On/Off Switch
|
Wireless Network(s) On/Off Switch
|
1) Press the MENU button, then select [Connection/Power]
2) [WLAN Settings]
3) [WLAN Connection]
4) Select On or Off
|
Heat dissipation
|
AC 100 V to 120 V
|
928 BTU/h
|
AC 220 V to 240 V
|
891 BTU/h
|
Dimensions (W x H x D)
|
Dimensions (W x H x D) (without protrusions)
|
Approx. 365 x 96.2 x 252 mm (14 3/8 X 3 25/32 X 9 29/32 inches)
|
Mass
|
Mass
|
Approx. 3.8 kg (8 lb)
|
Supplied accessories
|
Remote commander
|
RM-PJ8
|
Optional Accessories
|
Optional Lamp
|
LMP-E212
|
Wireless LAN module
|
IFU-WLM3
|
Notes
|
|
*1
|
This figure is expected maintenance time, not guaranteed time. The actual value depends on the environment and how the projector is used.
|
*2
|
The value is average.
|
*3
|
Available for VESA Reduced Blanking signal.
|
*4
|
From INPUT A and INPUT B.
|