PRODUCT TYPE
|
Large Venue Projector
|
PRODUCT NAME
|
Epson EB-Z8000WU
|
PRODUCT CODE
|
V11H266053
|
PROJECTION SYSTEM
|
RGB Liquid Shutter Projection System
|
PROJECTION METHOD
|
Front / Rear / Ceiling Mount
|
SPECIFICATION OF MAIN PARTS
|
LCD
|
Size
|
0.94 inches with MLA (x3)
|
|
Driving method
|
Poly-Silicon TFT Active Matrix
|
|
Native resolution
|
2,304,000 dots (1920 x 1200) x3
|
|
Native Resolution
|
WUXGA
|
|
Aspect ratio
|
16:10
|
|
Pixel arrangement
|
Cross Stripe
|
|
Refresh Rate
|
50Hz, 60Hz
|
PROJECTION LENS
|
Type
|
Power zoom / power focus / power lens shift
|
|
F-number
|
1.65 - 2.51
|
|
Focus length
|
36 - 57.35mm
|
|
Zoom ratio
|
1:1.61
|
LAMP
|
Type
|
330W UHE x 2
|
|
Life (estimated)
|
up to 2500 hours (power consumption: Normal)
up to 3500 hours (power consumption: ECO)
|
OPTICAL SYSTEM
|
Dichroic Mirror Separation & prism combine method
|
SCREEN SIZE (PROJECTED DISTANCE)
|
(STANDARD ZOOM LENS)
|
LENS SHIFT RANGE
|
Vertical: -70% to +70% (H Centre) (Powered)
Horizontal: -20% to +20% (V Centre) (Powered)
|
LIGHT OUTPUT
|
Normal (2 Lamps)
|
6,000 Lumens Light Output
6,000 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide, Lens shift: V Centre / H Centre)
|
ECO (2 Lamps)
|
4,800 Lumens Light Output
4,800 Lumens Colour Light Output
(Colour mode: Dynamic, Zoom: Wide, Lens shift: V Centre / H Centre)
|
CONTRAST
|
5000:1 (Auto Iris On)
|
BRIGHTNESS UNIFORMITY
|
90%(Typ.) (Lens shift : V Centre / H Centre)
|
COLOUR REPRODUCTIVITY
|
Full colour (16.77 million colours)
|
VIDEO QUALITY
|
3D Y/C Separation
|
|
Noise Reduction, Motion compensated Interlace-Progressive conversion (2-2,3-2 film detection)
|
SOUND OUTPUT
|
NA
|
EFFECTIVE SCANNING FREQUENCY RANGE (ANALOGUE)
|
PIXEL CLOCK
|
13.5MHz to 162MHz
Up to UXGA 60Hz
|
HORIZONTAL
|
15 to 80KHz
|
VERTICAL
|
50 to 85Hz
|
EFFECTIVE SCANNING FREQUENCY RANGE (DIGITAL)
|
PIXEL CLOCK
|
13.5MHz to 162MHz
Up to UXGA 60Hz
|
HORIZONTAL
|
15 to 80KHz
|
VERTICAL
|
24Hz, 30Hz, 50Hz, 60Hz
|
ADJUSTMENT FUNCTION
|
TILT ANGLE
|
-/+ 3.5 degrees
|
KEYSTONE CORRECTION
|
Vertical: -30 to +30 degrees
Horizontal: -20 to +20 degrees
(Zoom: Tele)
|
ANALOGUE RGB I/O
|
DISPLAY PERFORMANCE
|
Native
|
1920 x 1200 dots
|
INPUT SIGNAL
|
Signal type
|
Separate signal
|
|
Video signal
|
Analog (0.7V p-p,75 ohm/ Mac 0.714Vp-p, 75ohm)
|
|
Sync.signal
|
Separate (positive & negative, bi-polarity 2-5Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
|
|
Audio signal
|
500m Vrms / 47 k ohm
|
INPUT TERMINAL
|
Video
|
Mini D-sub 15 pin x 2 Blue-molding
5BNC x 1
|
|
Audio
|
NA
|
OUTPUT SIGNAL
|
Video
|
Analog (0.7 Vp-p, 75 ohm / Mac 0.714 Vp-p, 75 ohm)
|
|
Sync. signal
|
Separate (positive & negative, bi-polarity 2-5 Vpp) / Composite (positive & negative, bi-polarity 2-5Vpp) / Sync-on-green (negative, 0.3Vpp)
|
OUTPUT TERMINAL
|
Video
|
Mini D-sub 15pin x 1 Black molding
|
|
Audio
|
NA
|
HDMI
|
DISPLAY PERFORMANCE
|
Native
|
1920 x 1200 dots
|
INPUT SIGNAL
|
Version
|
1.3a
|
|
Resize
|
Video Standards up to 1080p,
PC standards up to UXGA-60,
Wide PC Standards up to WUXGA-60 RB.
Refer to Compatible mode (WUXGA)
|
|
Video Standard
|
480i / 576i / 480p / 576p / 720p / 1080i / 1080p
|
|
Video signal
|
TMDS
|
|
Input Terminal
|
DVI-D x 1 (HDCP)
|
DVI
|
DISPLAY PERFORMANCE
|
Native
|
1920 x 1200 dots (WUXGA)
|
INPUT SIGNAL
|
Resize
|
Video Standards up to 1080p,
PC standards up to UXGA-60,
Wide PC Standards up to WUXGA-60 RB.
Refer to Compatible mode (WUXGA)
|
|
Video Standard
|
480i / 576i / 480p / 576p / 720p / 1080i / 1080p
|
|
Video signal
|
500 mVrms / 47 k-ohm
|
|
Audio signal
|
NA
|
INPUT TERMINAL
|
video
|
DVI (Type D) x 1
|
CONTROL I/O
|
SERIAL I/O
|
I/O terminal
|
D-sub 9 pin x 1
|
|
I/O signal
|
RS-232C
|
NETWORK INTERFACE
|
RJ45 X 1
|
INPUT TERMINAL
|
Remote Control
|
Stereo mini jack x 1
|
OPERATING TEMPERATURE
|
0°C to 45°C (32°F to 113°F) (20% to 80% Humidity. unfrozen)
Thermal shut down > 50 °C (122 °F)
0 °C to 40 °C (32 °F to 104 °F)
( over 1500 m / 4921 ft : with High altitude mode , High brightness ) ( 20% - 80% humidity, unfrozen )
|
DIRECT POWER ON
|
Yes
|
COOL-DOWN PERIOD
|
Instant off 0 seconds
|
START-UP PERIOD
|
Approx' 30 seconds
|
RATED VOLTAGE & CURRENT
|
100 - 240V AC 50/60Hz 10.7 - 4.5A (16A circuit required)
|
POWER CONSUMPTION
|
Lamp On 877W (Normal Mode)
Lamp on 734w (ECO Mode)
Standby 13.1W (Network on)
Standby 0.5W (Network off)
|
DIMENSION
|
EXCLUDE PROJECTION LENS & FEET
|
534mm(D) x 734mm(W) x 167mm(H)
|
MAXIMUM DIMENSION
|
534mm(D) x 734mm(W) x 225mm(H)
|
WEIGHT
|
Approx. 22Kg with Standard Zoom Lens
|
FAN NOISE
|
32dB (ECO mode)
|
ACCESSORIES
|
POWER CORD
|
3m
|
COMPUTER CABLE
|
1.8m, Slim-cable with blue colour jacks, Mini D-sub 15pin (Male) - Mini D-sub 15pin(Male)
|
REMOTE CONTROL
|
Included
|
BATTERY
|
Alkaline, AA x2 (Included)
|
EPSON PROJECTOR SOFTWARE
|
CD-ROM
|
OWNER'S MANUAL
|
CD-ROM
|
SECURITY LABEL
|
Included
|
WARRANTY*
|
|
PROJECTOR
|
4 Years (10,000 hrs)
|
LAMP
|
1 Year (750 hrs)
|
|
|
* For more information visitEpson Projector Warranty
|
PRODUCT OPTIONS
|
Product Code
|
Description
|
V13H010L51
|
Replacement Lamp
|
V13H010L52
|
2 x Replacement Lamps
|
V12H134A23
|
Electrostatic Filter – EB-Z8000WU
|
V12H003B25
|
Ceiling Mount for EB-Z8000 series (flush)
|
V12H003B26
|
Ceiling Mount for EB-Z8000 series (telescopic)
|
V12H004S04
|
Standard Zoom Lens
|
V12H004R04
|
Rear Projection Wide Lens
|
V12H004W04
|
Wide Zoom Lens
|
V12H004M06
|
Middle Throw Lens
|
V12H004M07
|
Middle Throw Zoom Lens
|
V12H004L07
|
Long Throw Zoom Lens
|
Epson is the registered trademark of Seiko Epson Corporation. Epson ESC/P2 and Epson Stylus are trademarks of Seiko Epson Corporation. MicroDot is a trademark of Epson Australia Pty Limited. All other product names and other company names used herein are for identification purposes only and may be the trademarks or registered trademarks of their respective owners. Epson disclaims any and all rights in those marks. Specifications are subject to change without notice.
|
Equipment supplied by Epson Australia is designed to function in conjunction with genuine Epson consumables and accesories specifically configured for it
|
Usage Conditions
Epson products are designed and made to give highly reliable use and long life when used according to its specifications. With any system, product or device used in situations where human life may be involved or at risk, Epson advises that you should take all necessary steps to ensure the suitability of your Epson product for inclusion in your system, and recommends that you include fail-safe procedures and redundancy support or backup equipment in your system, to maintain the maximum safety margin and optimum system reliability. Examples include but are not limited to – do not interfere with any electrical components within the device, do not use items supplied with the product for purposes other than as intended by Epson (ie mains cords, inks, CDs, plastic wrapping) and do not make modifications to the product.
|